Aavot app status: in development — there’s no official Aavot app download or APK yet. See the status & join the waitlist →
Searching aavot, aavot com, aavot app, aavot download, tn aavot, avvot, av aavot, tv aavot or aavot ai? You’re in the right place — the Aavot app is in development; see the status.
Android Guides

Set Up Google Wallet Tap to Pay on Android

Turn your phone into a contactless card - the real requirements and the full setup.

Quick answer

To set up tap to pay, turn on NFC, set a screen lock, then open Google Wallet, tap Add to Wallet, choose Payment card, and add a supported card. Make Wallet your default contactless app under NFC settings. You need NFC hardware and a card from a supported bank and country.

Key points
  • Tap to pay needs a phone with NFC, turned on in settings
  • Your phone must have a screen lock set
  • Your card must come from a supported bank and country
  • Make Google Wallet the default contactless payment app under NFC settings
  • The first card you add becomes the default; you can change it later
  • Never share your full card details with anyone - only enter them into the official Wallet app

Google Wallet lets your phone act like a contactless card at payment terminals. Before it works you need three things: a phone with NFC turned on, a screen lock set, and a payment card from a supported bank and country. This guide covers turning on NFC, making Wallet your default contactless app, and adding a card. One safety rule throughout: only ever enter your card details into the official Google Wallet app, and never share full card numbers, PINs, or verification codes with anyone.

How tap to pay actually works

When you add a card to Wallet, your real card number is not stored on the phone or sent to shops. Instead, Wallet creates a separate device-specific number (a token) that stands in for your card. At the terminal, the phone sends that token over NFC, and your bank maps it back to your real account. This is why tapping your phone is generally considered as safe as, or safer than, tapping the physical card: a merchant never sees your actual card number, and the token is useless without your device and screen lock.

Step 1: Check and turn on the requirements

  1. NFC: Open Settings and search for NFC, then turn it on. NFC is the short-range radio that carries the payment.
  2. Screen lock: Set a PIN, pattern, password, or biometric lock in Settings > Security. Google requires this for tap to pay.
  3. Supported card: Make sure your bank and country are supported by Google Wallet. If your bank isn’t supported, the card can’t be added for payments.

Step 2: Make Google Wallet the default contactless app

  1. Open Settings.
  2. Go to Connected devices > Connection preferences > NFC.
  3. Tap Contactless payments.
  4. Select Google Wallet.
  5. Keep the Wallet app updated so it remains available as the payment service.

Step 3: Add your card

Enter card details only inside the official Google Wallet app. Legitimate setup never asks you to send your card number to a person, by message, or to any other website.

  1. Open the Google Wallet app and tap Add to Wallet at the bottom.
  2. Choose Payment card. Cards already saved to your Google account may appear here.
  3. Pick New credit or debit card, then either scan it with your camera or enter the details manually.
  4. Tap Save and continue, read your issuer’s terms, and accept them.
  5. If your bank asks you to verify the card, choose a verification method and follow the prompts. The verification code comes from your bank – don’t share it with anyone.

Step 4: Confirm the card is ready

Look at the message above the card in Wallet. No message means it’s ready to tap. Otherwise:

Message What it means What to do
Card not set up Setup is incomplete Tap Finish setup and follow the steps
Turn on NFC to pay with Wallet NFC is off or unsupported Turn NFC on in Settings
Card suspended Your bank paused the card Contact your bank
(No message) Card is ready Tap and pay

Step 5: Set your default card (optional)

  1. The first card you add becomes the default for tap to pay.
  2. To change it, open Wallet and tap the card you want.
  3. Tap Details.
  4. Choose Make default for tap to pay.

Step 6: Pay at the terminal

Wake and unlock your phone, then hold the back of it near the contactless reader. Wallet charges your default card. You usually don’t need to open the app, but the screen-lock check still acts as verification, which is why a lock is required. For larger amounts, some terminals prompt for your card PIN or an extra authentication step; that request comes from the terminal and your bank, not from a stranger, so it is normal.

Beyond payment cards

Google Wallet holds more than bank cards. You can also add loyalty and rewards cards, transit passes and tickets, boarding passes, and event tickets, so the app becomes a single place for the things you would otherwise carry. These items don’t all rely on tap to pay – some display a barcode or QR code instead – but they live alongside your payment cards. Only payment cards from a supported bank enable the contactless tap feature described here.

Troubleshooting

If a payment fails, run through Google’s checklist: NFC is on, Wallet is the default contactless app, a card is added, a screen lock is set, and the device is certified (uncertified or rooted phones may be blocked). Google may also remove a card as a security precaution, so re-add any card that disappears. For a card that shows as suspended, your bank is the right contact. If the terminal doesn’t react at all, try moving the phone slightly – the NFC antenna is usually near the top or center of the back – and hold it steady for a second or two rather than pulling it away too quickly.

Fees and where it’s accepted

Google Wallet itself does not charge you to tap to pay, and merchants see it as an ordinary contactless card payment, so your bank’s normal terms apply – the same rewards, limits, and foreign-transaction rules as the physical card. Tap to pay works at any terminal that accepts contactless cards, which is the vast majority of card readers today; look for the contactless symbol (the curved waves) on the reader. There is usually no extra cost, but note that very old terminals without contactless support will still require the physical card, and a few merchants disable contactless for high-value purchases. In those cases the terminal simply won’t respond to the tap, and you fall back to inserting or swiping the physical card as normal.

Keeping it secure

Because tap to pay is protected by your screen lock, a weak or absent lock undermines the whole system. Use a strong PIN or biometric lock, and if you lose your phone you can remotely lock or erase it and the tokens stop working. Tap to pay is the most common everyday use of your phone’s NFC chip; to understand what that chip does and its other uses, read what NFC on Android is.

If you just moved to a new phone, note that payment cards generally need to be re-added rather than copied across; our guide on transferring data to a new phone explains what does and doesn’t migrate. Because Wallet is tied to your Google account and your money, securing that account matters – see how to secure your Google account and keep your screen lock strong.

For another everyday feature that connects your phone to the screens around you, see how to cast Android to a TV. For more walkthroughs, browse all of our Android guides.

Menu labels vary by phone, language, and app version. If a name doesn’t match what you see, look for the closest equivalent or check Google’s Wallet help pages for the latest steps.

Frequently asked questions

What do I need before I can tap to pay?

Three things: a phone with NFC turned on, a screen lock set on the device, and a payment card from a bank and country Google Wallet supports. Without any one of these, tap to pay won't work.

How do I make Google Wallet the default for tap to pay?

On Android, open Settings > Connected devices > Connection preferences > NFC > Contactless payments, and select Google Wallet. Keep the Wallet app updated so it stays available as an option.

How do I add a card?

Open Google Wallet, tap Add to Wallet, choose Payment card, then New credit or debit card. Scan the card with your camera or enter the details manually, accept your bank's terms, and verify if asked. Only enter card details into the official Wallet app.

How do I set my default card?

The first card you add is the default. To change it, open Wallet, tap the card you want, tap Details, and choose Make default for tap to pay. Tap to pay always charges the default card.

Do I need to open the app to pay?

Usually no. Wake and unlock the phone, then hold it to the terminal; Wallet charges your default card. Your screen lock still acts as the verification step, which is why a lock is required.

Why does my card say 'Card not set up' or won't tap?

Common causes are NFC off, Wallet not set as the default contactless app, no card added, or no screen lock. Google may also remove a card as a security precaution, in which case re-add it. Contact your bank if the card shows as suspended.

Get launch updates from Aavot

One email when the official app ships. No spam, unsubscribe anytime.

Related reading

Android Guides

How to Change Your Keyboard on Android

Switch your Android keyboard to Gboard, SwiftKey or another app. Step-by-step settings for Samsung, Pixel and Xiaomi, plus how to swap on the fly.

27 Oct 2026